High Current Linear Current Isolator

$4,499.99 $3,999.99

The Linear Current Isolator High Current is a linear current source which is optimized for stimulation of extracellular and electrically excitable tissues with High DC and AC precision.


The Linear Current Isolator High Current is a linear current source which is optimized for stimulation of extracellular and electrically excitable tissues. The Output is capable of both source and sink the current, giving full four-quadrant performance. Its high input impedance and high common mode voltage prevents ground loop. With high bandwidth and high voltage slew rate, it can be used for high frequency stimulations or sharp waveforms. The LCI High Current has a best in class DC accuracy. Optional charge balanced stimulation compensates the DC offset of function generators. The LCI High Current is designed to deliver high currents to low impedance loads like coils. The LCI High Current is easy to use and has a simple user interface and requires minimal maintenance due to an error detection system, internal calibration and advanced power management.

Caputron High Prescision Linear Current Isolator Overview

  • High DC and AC precision
  • High Bandwidth
  • Can compensate input offset for accurate charge balanced stimulation
  • Capable of removing output DC offset voltage
  • EMI shielded to reduce noise
  • Rechargeable batteries with increased lifespan and capacity
  • Simple user interface
Caputron Linear Current Isolator Device Features

High Prescision Linear Current Isolator Features

Isolator Input

Input signal range is ±10 V with overvoltage protection. If the input exceeded this range, the indicator LED on panel lights up. While device is on, the input section is designed to show a very high impedance to output (10 GΩ || 220 pF) to prevent ground loop. A BNC connector carries the signal inside the device.

Caputron High Current Linear Current Isolator Input Specifications

Isolator Output

The output compliance voltage of device is ±30 V. The output impedance of the device is more than 60 MΩ. The circuit is floating and the impedance between input and output is more than 1 GΩ. The maximum drivable load at 1 V input, is 1.2 kΩ for 25 mA/V and 12 kΩ for 2.5 mA/V gains.

Caputron High Current Linear Current Isolator Output Specifications

DC Transfer Characteristics

DC transfer characteristics describe conversion of input voltage to output current and the precision of the conversion in steady state.

Caputron High Current Current Isolator DC Transfer Characteristics

AC Transfer Characteristics

AC characteristics describe the process of output following the input. Bode plot is a good tool to show the accuracy of input-output conversion. The following plots show the output gain and the output phase with a 1 Vpp sinusoid as input signal.

Caputron High Current Current Isolator AC Transfer Characteristics

Charge Balance Stimulation

In order to have a charge balanced stimulation, device should sink the exact same amount of charge that is delivered to the target. Function generators or DACs which can be used to command the current source, have DC offset at the output. Even a small amount of offset at the device input, cause current leakage at output, which will be accumulated after multiple cycles and cause electrode corrosion. This feature subtracts DC value from input signal. DC value of signal is driven by an integrator with time constant of 0.1 s.

CAUTION: Only if charge balanced stimulation is required, toggle the charge balanced switch from “Normal” state to “Chrg blncd”.

Battery and Charging

  • Battery capacity of 10 Ah with fresh batteries
  • 4 level battery indicator
  • 15 V DC 2 A wall adapter
  • Charging status LED (Red: Charging, Green: Charged)

Caputron Linear Current Isolator High Current uses high capacity Li-ion batteries. Life time of these batteries are around 1200 periods of charging and discharging, and they need least amount of maintenance. Batteries can power device on for more than 4 hours of continuous stimulation with 1mA output current. Beyond rated lifespan of battery, the capacity of them fall and device needs to be charged more frequently. It is recommended to not use batteries beyond their rated lifespan. Batteries can be easily replaced by opening the device and inserting new batteries with the same specifications.

Caputron High Current Current Isolator LCI HC Battery Specifications

Selectable Gain

  • High current and Low current modes with conversion ratio of 25 mA/V and 2.5 mA/V respectively
  • Surge free switching between gains

The device is equipped with two different feedback networks, one provides 25 mA at output per 1 V of input command, and the other converts 1 V of input command to 2.5 mA of current at the output. Changing current gain does not cause any surge at the output. Following figure shows the absolute error of output in -25 mA to 25 mA range, with both conversion ratios.

Caputron High Current Current Isolator Absolute Error conversion ratios

Isolator Device Comparison Table and Specifications

This device comparison table provides an overview of the specifications and features between the Caputron High Precision Linear Current Isolator, Caputron High Current Linear Current Isolator, Caputron High Voltage Linear Current Isolator, Stanford Research Systems Model CS580 Voltage Controlled Current Source, A-M Systems Model 2200 Analog Stimulus Isolator and World Precision Instruments A395RC Linear Stimulus Isolator.

Below is a table containing detailed data of different parameters that can be useful for assessment of each product. All products were new, calibrated and tested under the same exact conditions.

Caputron Linear Current Isolator Device Comparison Table
Linear Current Isolator Device Comparison Highlights
Scaled Performance of Highlighted Parameters

Need to Return Your Purchase? It's Easy - Caputron Offers 90 Day Hassle Free Returns

Our return policy is simple. If you are not 100% satisfied with your purchase from Caputron you can return your item(s) within 90 days of purchase. If 90 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

(Returned devices must be in a new undamaged condition.) Merchandise returned damaged may not qualify for a refund.

Opened or used accessories such as electrodes, gel, saline, or other consumables are not eligible for a refund.

Packages are generally dispatched within 1-3 days after receipt of payment, though some exceptions may apply, and are shipped via UPS, DHL and USPS with tracking (when applicable) and drop-off without signature. If you prefer delivery by a different method, please contact us. Delivery with signature is available for an additional fee.

Once your order is shipped you will receive an email or sms message when applicabale (additional carrier rates may apply) with any tracking information available -- you can check order status by logging into your account.

International Customers Please Note: Any additional fees required by customs will be the responsibility of the buyer. We cannot control customs processing times in international countries. It is not uncommon for USPS First Class/Flat Rate parcels, or packages of any type, to get caught up in customs for weeks at a time. We highly recommend using UPS or DHL for international orders as they provide faster customs processing times and accurate tracking updates. We are not responsible for any added time due to customs. We will not be liable for, nor will any adjustment, refund, or credit of any kind be given as a result of any delay, misdelivery, or non-delivery. Items returned to us that were deemed undeliverable and are not damaged in any way are subject to partial refund for the cost of the merchandise minus the cost of shipping. At the discretion of both Caputron and the buyer, redelivery may be attempted for additional shipping costs determined prior to reshipment.

* When offered, free shipping is eligible only for the contiguous United States and does not apply to items that need to be shipped freight or for certain research items.

Customer Reviews

No reviews yet